fusion heat
英 [ˈfjuːʒn hiːt]
美 [ˈfjuːʒn hiːt]
熔化热
双语例句
- The latent heat of fusion and heat capacities of paraffin wax are important parameters in design and calculation of thermal energy storage system.
潜热的融合和热的能力，石蜡是重要的参数设计与计算热储能系统。 - The forming mechanism is different in the fusion layer, brazing layer and heat agglomerating layer.
渗铬层内不同区域的形成机理有较大差别。 - The hardness in fusion zone, heat affect zone and base metal was measured, compared and analyzed.
测量、比较、分析了焊缝、热影响区、母材的硬度。 - There are many methods to get the latent heat of fusion and heat capacity of substance.
有很多方法，以获得潜热融合和热容量的实质内容。 - The heat of fusion is the heat required to melt a substance at its normal melting temperature.
熔化热是一种物质在其熔点温度全部熔化所需要的热量。 - Objective To construct a fusion expression vector of Escherichia coli heat labile enterotoxin B subunit.
目的构建大肠杆菌不耐热肠毒素B亚单位的包涵体形式融合表达载体。 - Because of high thermal conductivity, welding of copper and its alloys is usually difficult by conventional fusion welding processes. The heat input required is much higher than that in almost other materials, and the welding speed is quite low.
由于铜及其合金具有很高的导热系数，使用传统的熔焊方法焊接通常是很困难的，焊接过程中需要很高的能量输入，而且焊接速度较低。 - And the addition of fillers with high specific surface area will cause an increase in the fusion heat of PTFE composites, then that makes the wear rate decrease;
高比表面填料的加入会提高复合材料的熔化热，有助于降低材料的磨损率； - Soft Measurement of Fuel Quantity Based on Data Fusion and On-line Calibration of Coal Heat Values
基于数据融合的燃料量软测量及煤质发热量在线校正 - Calculating the fusion heat of deoxidant elements based on binary alloy phase diagram
根据二元合金相图计算脱氧元素的熔化热 - Study on Fusion Heat of Binary Salt Hydrates for Cool Storage by DSC
二元贮冷水合盐熔解热的差示扫描量热法研究 - The results showed that the blend had single melting peaks, the addition of SEBS-g-MA made melting point and fusion heat decreased;
实验结果表明，共混体系均为单一的熔融行为，加入的SEBS-g-MA使熔点和熔融热下降； - Measure Fusion Heat of the Ice and Revision of the Absorb Heat
测定冰的熔解热及吸热修正 - In basis of analyzing the features of the conventional arc welding technology, a DC low-frequency plasma welding power with fusion penetration is selected as the heat source for metal forming.
本课题在分析常规弧焊技术特点的基础上，选取熔透式低频直流等离子弧焊电源作为成形的热源。 - Factor β_e depends on weighted average of fusion heat and sublimation heat of crystal in thermodynamics, it accords with text results that β_e is taken as the standard.
βe因子在热力学方面取决于晶体熔化热和升华热的加权平均值，把它作为界面平衡结构的判据符合实验结果。 - The presence of 4-vinyl pyridine on the PP nonwoven cloth was characterized by FTIR, and the result of DSC analysis showed that the fusion heat and crystallinity changed in the process of graft reaction.
FTIR的分析结果证明了4-乙烯基吡啶基团的存在，DSC分析证实了接枝反应过程中PP的熔融热和结晶度发生了变化。 - Based on the experimental result obtained, the droplet fragmentation characteristics, especially effects of the melt enthalpy, fusion heat and viscosity on the drop deformation and fragmentation process, are discussed and clarified.
根据实验结果探讨了液滴材料的焓、熔化潜热、粘性等因素影响液滴变形与破碎过程的规律。 - To track on the temperature-measurement of fusion heat of phase change storage materials
跟踪温度&测定相变贮热物质熔化热 - A Theoretical Analysis of Fusion Latent Heat of Cold Storage Material
空调蓄冷介质融解潜热理论分析 - Zero-type dynamometer& fusion heat measurement for phase change materials
零示法&相变物质熔化热的测定 - Three modified specific huat functions were used to simulate the release of fusion heat during the solidification stage.
采用了三种不同折合比热函数来模拟凝固阶段潜热的释放。 - Prediction of the Melting Temperature and the Fusion Heat of ( Quasi-) Eutectic PCM
（准）共晶系相变材料融点及融解热的理论预测 - Experimental Research of Latent Heat of Fusion and Specific Heat Capacities with Quasi-Steady State Theory
准稳态理论测量融解热及比热容的实验研究 - Construction and Prokaryotic Expression of Fusion Gene of NY-ESO-1 and Heat Shock Protein 70
NY-ESO-1和热休克蛋白70融合基因的构建和原核表达 - High energy beam welding has many advantages such as heat centralize, small input, heat, small heat HAZ, and high welding precision, which can welding difficult, fusion metal, good heat, sensitivity and so on.
高能束焊具有加热集中、热输入量少、焊接变形小、热影响区小、焊接精度高，宜适用于难熔金属、热敏感性强的金属焊接等优点。 - The disbonding cracking of the fusion zone depends on the heat treatment after welding.
熔合区的剥离裂纹与焊后热处理制度有关。 - This is due to the fact that laser beams with a flat-top profile or other kinds of profiles are desired in various applications, such as in the applications of laser fusion, laser heat treatment and optical data processing etc.
光束整形之所以热门，是因为这些特殊形式的光束可应用于激光光学及生物医学等领域。例如，平顶光束可应用于激光核聚变、激光热处理等领域。 - Neutral beam injector ( NBI) is an equipment that is used to inject high energetic particle beam into the fusion device and heat plasma availably. The research of injecting neutral particle beam is always an important issue in the fusion research.
中性束注入器（Neutralbeaminjector，NBI）是产生高能中性粒子束并输送至聚变装置以有效加热等离子体的设备，中性束注入一直是聚变研究的一个热点问题。